Detailed Product Description

Split Pressurized Solar Water Heater is composed of solar collector, storage tank, controller, working station and installation parts.
Working principle:
* When the discrepant temperature of the solar collector and water tank reaches or not reaches the set value, the controller shall start or shut the circulation pump automatically.
* The circulation pump makes water circulate automatically.
* In case the temperature of the water tank does not reach Tmax, then start the auxiliary heating device.
Product specification:
* Inner tank: Stainless steel (SUS304 2B)
Thickness: 1.2-2mm
* Outer tank: Stainless steel (SUS304 2B)
Thickness: 0.3-0.5mm
* Insulating layer: Foaming polyurethane
Thickness: 55mm
Heat preservation: 72 hours
* Highly efficient all glass vacuum tube or superconductive pipe
* The number of tube: 10pcs, 12pcs, 15pcs, 16pcs, 18pcs, 20pcs, 24pcs, 30pcs, 36pcs
* Water capacity: 78L-300L
* Optional Electric Booster: 1500w
Features:
1) Collector separates with the storage tank. The tank can be put anywhere of the house.
2) The collector can be put on both tilted roof and flat roof.
3) Module design harmony with the building perfectly.
4) Intelligent control and automatic operation.
5) If the solar water heater uses superconductive pipe, it can still in service even with several tubes breakage
6) Multifunction: Bathing, washing, domestic heating.